Hydraulic Arm Manipulator For Induction Furnace

About Hydraulic Arm Manipulator For Induction Furnace

Poking Machine is the special equipment for Induction Furnace to push the SCRAP in crucible of Induction furnace to improve efficiency and thus the installation of the Poking Machine is contemplated as per the following specification.

The Poking Machine is use to push the Scrap in crucible. It is a hydraulically operated machine of sturdy construction use for Iron and Steel Furnace, Aluminum holding furnaces and in other hot metal furnace. This reduces the melting cycling time by 15% to 20%. The cartridges are designed to facilitate digging into the crust of metal scrap and push it into crucible.


A compact adequately designed Electro Hydraulic System is provided for all its movement namely Rotating, Pulling, Pushing / Poking for up and down movement as well as reverse &forward movement through telescopic arm on its base for satisfactory operation of the poking machine. Mineral based hydraulic oil shall be used. Hydraulic flexible hose are used for smooth operation.

 
The design incorporates telescopic boom with vertical pushing Probe and a large bearing base for swing movement.

 
The REMSO Arm Manipulator is mounted on column support structure, which forward    from a parking position to the Pushing position and retract to parking position. Cartridges will   be replaced manually in the parking position besides the furnace